 |
| |
|
BACK |
|
|
|
|
|
|
|
|
|
|
 |
ACOUSTIC WALL TILE
Specially designed for absorbing mid/high frequencies. Typically used at primary reflection points on walls and ceiling.
Size: 500x500x50mm deep
Acoustic Test Results
|
 |
ACOUSTIC WALL TILE
Specially designed for absorbing
mid/high frequencies. Typically
used at primary reflection points
on walls and ceiling.
Size: 500x500x75mm deep
|
 |
ACOUSTIC WALL TILE
Specially designed for absorbing
mid/high frequencies. Typically
used at primary reflection points
on walls and ceiling.
Size: 500x500x100mm deep |
 |
ACOUSTIC CORNER PANEL
Specially designed for absorbing
low/mid frequencies. Typically
used in wall/ceiling corners
to reduce low/mid standing
waves that cause peaks and dips.
Size: 1000x470x165mm |
 |
ACOUSTIC BASS ENHANCER
Specially designed for absorbing
low frequencies. Typically used
in vertical corners to reduce
bass standing waves that cause
peaks and dips.
Size: 1000x850x190mm |
 |
10 STANDARD COLOURS
The fonic-tile lends itself to creating a unique designer style feel. With unlimited colour ranges and patterns
Your imagination is the only limit!
COLOURS Available |
| |
Fonic Bass Traps are designed for use in the corners where two surfaces meet at 90 degrees (placed anywhere else they will not have the same effect on low frequencies), this is usually where two walls meet. They are also made to be stacked on top of each other as high as the ceiling permits. To further improve the performance, Fonic Low/Mid Traps can be snugly fitted behind Fonic Bass Traps.
Fonic Low/Mid Traps are similar to Fonic Bass Traps, but designed primarily to be used in 90 degree corners where walls meet the ceiling (or where walls meet the floor). They can be used in as much of this area as space permits.
It is vital to balance the use of Bass Traps, Low/Mid Traps and Fonic Tiles in a room, to achieve a smoothed response. |
| |
|
|
|
|
All Fonic Acoustic Product Types have been Flamability Tested. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The standard FONIC range has been tested and passed the following flamability standard.
BS5852 - 1990 (section 4 12.2) British flammability standard.
Smouldering cigarette test: Ignition Source 0
Assessment of ignitability by smouldering ignition source
STD- Standard rating that Fonic range conforms to
|
|
The FONIC range is also available in an enhanced flame resistant FR Series conforming to the following flamability standards
BS5852 - 1990 (section 4 12.2) British flammability standard.
Smouldering cigarette test: Ignition Source 0
Assessment of ignitability by smouldering ignition source
BS5852 - 1990 (section 4 12.3) British flammability standard Modified 2, Butane flame test: Ignition Source 2
(2) Propane gas used instead of butane gas in flame ignition tests. Flaming Ignition |
|
The above test results relate only to the ignitability of the combination of upholstery composities (section 4 of BS5852 - 1990) under the particular conditions test stated; they are not intended as a means of assessing the full potential fire harzard of the materials or products in use.
Please consult the standards or your local authority to determine the suitability of these products to your application. |
|
|
|
|
|
|
|
|
|
|
PRODUCT |
COLOUR |
FLAMAMILITY RATING |
TILE |
GREY (standard) |
STD - Standard |
TILE 3" |
RED |
FR - FR Series |
TILE 4" |
WHITE |
|
LOW/MID TRAP |
BLACK |
|
BASS TRAP |
PURPLE |
|
|
BROWN |
|
|
YELLOW |
|
|
BURGANDY |
|
|
STEEL BLUE |
|
|
NAVY BLUE |
|
|
ELECTRIC BLUE |
|
|
FOREST GREEN |
|
|
|
|
|
|
|
Example of ordering is TILE / GREY / STD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|