REF |
ITEM |
DESCRIPTION AND PART No. |
MS1S MS1A |
CLIFF MS - SERIES - Power Inlet Sockets. Rated 10A - 250VAC |
|
MS2 | CLIFF MS - SERIES - Power Inlet Sockets. Rated 10A - 250VAC |
|
MS1/X | CLIFF MS - SERIES - SNAP IN MOUNTING Power Inlet Sockets. Rated 10A - 250VAC Produced from heat resistant plastic,nickel plated brass metal parts. Two panel thickness options: MS1X/S1 - PANEL 0.8/1.0mm(CL19191) MS1X/A1 - PANEL 0.8/1.0mm (CL19193) MS1X/S - PANEL 1.0/ 1.8mm(CL19192) MS1X/A - PANEL 1.0/ 1.8mm (CL19194) |
|
MS1- PC | CLIFF MS - SERIES - PC MOUNTING Power Inlet Sockets. Rated 10A - 250VAC Produced from heat resistant plastic,nickel plated brass metal parts. REFER TO OUR CAD DRAWINGS WHEN LAYING OUT PCB MS1-PCA (CL19210) MS1-PCAX (CL192101) MS1-PCB (CL19211) MS1-PCBX (CL192111) |
|
MS3 |
CLIFF MS-3 incorporates, INLET SOCKET - FUSEHOLDER - VOLTAGE SELECTOR. The fuse carrier is available printed for various voltage combinations.( Rated 10A - 250VAC MS3 - requires fuse carrier (CL1927) MS3DPS - ‘L’ pin is not connected to the fuseholder. Permits double pole switching. (CL19271) |
|
MS3X | CLIFF MS-3X is only made with solder tags. Designed to snap into panels up to 2mm thick.Note: Only approved to 6A, 250V for UL/CSA. MS3X - Snap-in version without the voltage selector option (CL19272) |
|
MR1S | CLIFF MR1S Reversed outlets to IEC 320 - 2-2. MR1S - For chassis mounting (Rated 6A) |
|
MR1SB | CLIFF MR1SB Reversed outlets to IEC 320 - 2-2. Rated 10A. For snap in mounting, 3 models for 1.0, 1.5, 2.0mm thick panels. |
|
PB1 | CLIFF PB1 are moulded PVC insulating boots which slip over |
|
PB3 | CLIFF PB3 are moulded PVC insulating boots which slip over the rear of MS3 covering up potentially hazardous bare voltage terminals. |
|
CP22R | CLIFF CP22R 3 pole appliance plug. Rewirable for power out applications. Rated 10A 250VAC. Connections can be made by soldering or by screws. Max cable 3 x 1.0mm2. Fits MR1S and MR1SB outlets. |
|
CP22S | CLIFF CP22S 3 pole appliance plug. Rewirable. Rated 10A 250VAC. Cable connections can be made by soldering or by screws. Max cable 3 x 1.0mm2. Fits MS-1 and MS-3 inlets. |